SKU: GACD36LP

Choosing the right size Generator CD-3 through CD-36 Carbon dioxide enrichment equipment and methods have improved as experience and the understanding of atmospheric control and plant physiology has advanced. Plant metabolism and growth rate are dependent on the available atmospheric CO2. Plants are keenly sensitive to CO2 variations and optimum values must be constant and precisely controlled. The method, timing, and size of equipment must be properly determined to provide maximum benefits and economy. Carefully follow the operation charts to choose the proper size generator for the cubic foot area. Keep the recharge times to a minimum for best results. Do not undersize the generator or optimum results may never be achieved.

Example: A CD-6 will take 10 minutes to produce a CO2 level of 1000 ppm in a 1000 cu. ft. enclosure. The area should be charged as quickly as possible for maximum advantage. Charging the atmosphere quickly insures that the rapid photosynthesis process will not be interrupted and the plants growth rate reduced. Five to ten minutes is a good charge time. Try not to exceed twenty minutes. Your microclimate will need to be recharged every 1 to 4 hours depending on how much CO2 is lost due to plant usage or drafts (leaks). Large greenhouses logically require longer charge times and multiple units may be necessary. The CD-36 takes 1.66 minutes per 1000 cu.ft. area to charge to 1000 ppm. Therefore a 20,000 cu. ft. area would be 20 X 1.66 which is 33.2 minutes. For this application that may be an acceptable charge time.

Includes wall mount, hang chains and all the hookup. "COMPLETE" Green Air Products Green Air Products